Cyclo Drive Reducer

Cycloidal pinwheel reducer is normally a up-dated of new type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin steering wheel clenching device, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical conveyors, project machinery etc, Industry and cranes. various fields.

1. Gear is constructed of high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is used for all good contact performance, gears and with substantial precision
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light-weight, long service lifestyle and high bearing potential;
5. convenient to assemble, disassemble and check.

Operation specifications and precautions
1.High modularization design: various equip with various electric motor or other power source conveniently.Same machine type may equip with numerous power motor. It really is easy to recognize the combination and
junction between every machine type.
2.Transmission ratio: okay division, wide scope. The combined equipment type may form large transmission ratio, i.e. outcome very low rotary speed.
3.Form of set up: the positioning to be installed isn’t limited.
4.High strength, compact: the box body is constructed of great strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and good grinding process, which means bearing potential of unitvolume is great.
5.Long life: Beneath the condition of correct type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life of main elements of speed reducer (except wearing parts) shouldn’t be significantly less than 20000 hours. The wearing parts include lubricating essential oil, essential oil seal and bearing.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High rate ratio and efficiency
Single stage transmission can reach to at least one 1:87 of speed-down ratio and the efficiency is normally more than 90%. If employ multi-speed drive the speed-down ratio is definitely bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and outcome shaft are at same axis center, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is easy, but it can realize high reduction ratio product.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged at the same time, and there are several gears engaged with 180 degree symmetry. Therefore, the effect of tooth pitch error and cumulative tooth pitch error on the rotation precision is relatively average, which makes the position precision and rotation precision reach a very high level.
4. Less parts, convenient installation
The three basic parts achieve a high deceleration ratio, plus they are all on a single axis, so the kit is simple to install and easy to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the fat is 1/2, but can buy the same torque capability and reduction ratio, attaining small lightweight.
6 High torque capacity
Flexible wheel material USES special steel with substantial fatigue strength.Different from ordinary transmission product, the number of teeth meshing makes up about relevant to 30% of the full total amount of teeth. Moreover, it is in contact with the surface, in order that the pressure borne by each equipment is reduced and huge torque capacity can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss due to friction. Therefore, high reduction ratio may be accomplished while maintaining high efficiency, and miniaturization of generating motor could be realized.
8. Low noise
The gear meshing cycle rate is low, the transmission movements force balance, therefore the procedure is quiet, and the vibration is very small.
◆High speed ratio and large efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will end up being larger.
◆Because planetary transmission theory is adopted, the insight shaft and productivity shaft are on the same axis line, so that the machine style can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts causes the vibration and voice limited to a minimum.
◆Reliable use and extended service life as the key parts are made from excessive carbon chromium steel, large strength is obtained by quenching (HRC58-62), and rolling friction can be used in some transmission contacts, therefore the service life is extended.
Cycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has many advantages, versatile, and can be both negative and positive operation.

•Big ratio, and large efficiency Smooth operation,

• low noise The usage of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically no wear, durable.

• Compact structure,

• little size Because the use of a planetary transmitting, the source shaft and the output shaft on the same axis, making the model to obtain the smallest possible size.

• Reasonable design, easy protection, and break down easily install,

• the least number of parts along with straightforward lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion carrier, precision and improve the output strength.

(2).Hoop clamp coupling have five connection techniques well suited for different application environments.

(3).Size above PL/PF120(including)precision and high power integral inner gear housing, processed in one station,which get rid of the cumulative mistake and assembling mistake of split type.Remove casting process;adopt scorching of forging process, which will reduce the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which much easier to make gear area smooth and high precision,decrease the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its overall performance and mounting dime nsions conform the same types of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, beautiful shape, compact structure and radiate heat efficiently.
Very good sealing and adaptability.Its combination with T gear reducer and MB/MBN variator can meet a myriad of speed requirement.


Pto adapter

As one of leading pto adapter manufacturers, suppliers and exporters of mechanical products, We offer pto adapter and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto adapter

Recent Posts