worm gear box assembly

Ever-Power has been developing and manufacturing reliable, high performance gearboxes for over 20 years. RW Series miniature right angle gearboxes offer high torque values with very low backlash in extremely compact frames. Three gear ratios are available to meet up the needs of your specific application.
Order the Ever-Power RW Series worm gear box assembly you will need, demand a quote, or contact us for more information.
Worm Wheel Miniature Gearboxes
Our RW series miniature worm gear box assembly could be small, but it’s difficult enough to take care of demanding power transfer applications. Designed with machined aluminum housings and hardened metal input and output gears, they’ll deliver many years of reliable performance.
Obtainable in three standard result ratios and with two result shaft diameter options, it’s easy to find the Ever-Power right miniature gearbox for your needs. Each RW model worm gear box assembly provides proportionally high torque ideals (1.4 NM at 3,000 RPM) with very low backlash (maximum 2° backlash).
For full specifications and Dimensional Parametric Search, see individual item listings.
The Ever-Power Advantage
High efficiency miniature correct angle gearbox (up to 90% at 1,000 RPM)
Three gear ratios available: 5:1, 10:1, and 20:1
Extremely compact footprint: 1.5” x 1.5” x 1.08”
12.5 inch-lbs. output torque
Suprisingly low backlash (2° backlash maximum)
90° output angle
Maximum input speed: 3,000 RPM
Machined aluminum casing with hardened metal gears and oil-impregnated bronze bearings
Permanently lubricated
Manufactured in the China
Mechanical drives take supplied torque and may increase or reduce that torque predicated on application. Also speed is increased or reduced compared index G – GEAR BOXES – on blue – smallto the speed reduction ratio. Ever-Power includes a full type of gearboxes and acceleration reducers, and the elements needed to build them, in an array of regular ratios and shaft choices in addition to custom designs.
Helical, bevel, and miter equipment boxes provide options of quickness reducers or velocity increasers, and may be powered in either direction. All Ever-Power worm gear speed reducers and right angle drives are produced for powerful in a large spectral range of applications. Typically worm equipment boxes are not used as rate increasers. The cases are molded glass-filled materials making them extremely durable and resistant to corrosive conditions. They are offered in an array of ratios and are built with right hands or left hands worm gears. The result shafts could be solid or hollow, and load capacity is unaffected by direction and rotation.
Worm gear quickness reducers are comprised of a screw (the worm) that drives a wheel (helical gear) or single enveloping wheel and so are used in mechanical applications which range from conveyors to exercise devices to robots.
Geneva mechanisms and assemblies are usually used to transform continuous rotary motion into intermittent rotary movement. The rotating drive wheel includes a pin that gets to into a slot of the powered wheel advancing it by one step and a blocking disc that locks the powered wheel in position between steps.
Compact design
Compact design is one of the key words of the standard gearboxes of the BJ-Series. Further optimisation may be accomplished through the use of adapted gearboxes or special gearboxes.
Low noise
Our worm gearboxes and actuators are extremely quiet. This is due to the very smooth working of the worm equipment combined with the use of cast iron and high precision on component manufacturing and assembly. Regarding the our precision gearboxes, we consider extra care of any sound which can be interpreted as a murmur from the gear. Therefore the general noise degree of our gearbox is certainly reduced to a complete minimum.
Angle gearboxes
On the worm gearbox the input shaft and output shaft are perpendicular to one another. This frequently proves to become a decisive advantage producing the incorporation of the gearbox considerably simpler and smaller sized.The worm gearbox can be an angle gear. This is often an edge for incorporation into constructions.
Solid bearings in solid housing
The output shaft of the BJ worm gearbox is quite firmly embedded in the gear house and is well suited for direct suspension for wheels, movable arms and other parts rather than needing to create a separate suspension.
Self locking
For larger gear ratios,EP-Gear’s worm gearboxes provides a self-locking impact, which in many situations can be used as brake or as extra protection. Also spindle gearboxes with a trapezoidal spindle are self-locking, making them well suited for a wide variety of solutions.
Structural Features
The worm-gear reducer comprises of three main parts: housing, worm-gear and wheel.
The carcasses are made of GG-25 cast-iron, and are available for all sorts of gear-reducer. This make them perform efficiently under stressed conditions, vibrations or any type of setback that can’t be avoided during the assembly
The worm-gear is constructed of hardened and quench-hardened steel, with ground- on teeth sides, and the crowns manufactured from DIN (GZ-CuSn 12 Ni2) centricast bronze, melted on steel. Because of the mechanical work of these two parts having high quality, excellent overall performance and low noise levels have been achived.
The output shaft is hollow, although it is possible to adapt a good shaft.
The oil seals manufactured from NITRILE BUTADIENE, according to DIN 3760, top quality bearings, an EPOXY- impregnated finish ( 2 components), and grey-coloured SINGLE LAYER ENAMEL finish ( 2 components) ( RAL 7672), provide the most competitive gear reducer out there.
Size 63
In the size 62 of the MF series, worm-gear reducers, the output hollow shaft of diameter 30 has been included, that substitutes to the output hollow shaft with diameter 25, from size 62. This variant has like reference size 63 and exists like answer to the ask for of our costumers since, upon mounting greater bearings in the output, bears better axial loads that its analogous one in the MF-62 series. The others of technical feature are identical to the its analogous in the size 62.
Assembly Position
In order to set up a gear reducer and to make it work efficiently, the following instructions must be considered:
It should be fixed on a set surface in order to avoid either vibrations or tensions.
If undistributed loads or continued start-ups are foreseen, it is recommended to insert compensating couplings, connectors, torque limiters etc…
If the apparatus reducer had to be painted, the oil seals must be covered to prevent them from drying and losing their seal.
The device work of the fittings set up in the output shafts require an ISO H7 or h6 margin for the hollow shaft.
Backdriving
It is wise to pay attention to this factor when the gear reducer output shaft is driven instead of being a driver. Bearing in mind that among the features of this worm-gear reducer may be the fact that can’t be axle-driven by the result shaft (irreversibility), it really is almost impossible to meet up total irreversibility conditions, due to external elements such as for example vibrations, etc. For this reason, when the application requires total irreversibility, it is advisable to make use of external brakes with enough capacity to avoid slipping.
It could be said that the circumstances under which irreversibility can occur are the following:
• Efficiency < 0,55 (find table of technical features).
Maintenance
This kind of gear reducer will get a permanent lubrication, so that it really does not need any kind of maintenance.
Lubrication
The lubrication of this gear reducer type is continuous and comes as standard, with top quality refined oil which has antirust and antiwear products with Fe, Cu and alloy protectors which has quality level CLP DIN 51517-3, FGZ level 12, AP GL-4, US 224, AGMA 250-04; because of this its maintenance isn’t needed.

High reduction gear
Worm and wheel gear pairings provide large rate reduction ratios with only one equipment pairing in a more compact space when compared with other types of gears. You can expect up to a maximum ratio of 100:1 with our products. Another advantage of the Worm and Wheel gear pairings may be the low level noise they produce. Some drawbacks are the general low performance and the actual fact that they generate warmth.

Advantage of EP’s Worm Gears – “Frosty rolled Worm Gears”
1) The hardness of the helicoid surface has been achieved by function hardening when the frosty rolling was performed, providing Worm gears with better mechanical properties than machined worms due to truth that the metallic fibrous structure has not been cut.

2) The top hardness after frosty rolling is increased by 1.2 to at least one 1.3 times when compared with the hardness of the original material, and the hardness of the helicoid surface increases to around HB240 to 260.

3) Chilly rolled worms are ideal for miniature gear applications since this is often rotated smoothly without damaging the worm wheels made out of POM or various other soft materials.

4) Because of the implementation of this cold rolling technique, the helicoid surface of EP-Worm (M0.5 to 2.0) comes away with a mirror like complete. Thus, EP-Precision Frosty Rolled Worms provide a smooth procedure and long term durability.

Worm gears are made of a worm and a equipment (sometimes referred to as a worm wheel), with non-parallel, nonintersecting shafts oriented 90 degrees to one another. The worm is definitely analogous to a screw with a V-type thread, and the apparatus is analogous to a spur gear. The worm is normally the traveling component, with the worm’s thread advancing one’s teeth of the gear.

Such as a ball screw, the worm in a worm gear might have an individual start or multiple starts – meaning that there are multiple threads, or helicies, on the worm. For a single-start worm, each full switch (360 degrees) of the worm advances the gear by one tooth. So a gear with 24 teeth provides a gear reduced amount of 24:1. For a multi-begin worm, the apparatus reduction equals the number of teeth on the gear, divided by the number of begins on the worm. (That is not the same as most other types of gears, where in fact the gear reduction can be a function of the diameters of both components.)
The meshing of the worm and the apparatus is an assortment of sliding and rolling actions, but sliding contact dominates at high reduction ratios. This sliding actions causes friction and warmth, which limits the efficiency of worm gears to 30 to 50 percent. To be able to minimize friction (and therefore, warmth), the worm and equipment are made of dissimilar metals – for instance, the worm may be produced of hardened steel and the apparatus manufactured from bronze or aluminum.

Although the sliding contact decreases efficiency, it provides very quiet operation. (The usage of dissimilar metals for the worm and gear also plays a part in quiet operation.) This makes worm gears suitable for use where noise should be minimized, such as in elevators. Furthermore, the use of a softer material for the gear means that it can absorb shock loads, like those skilled in weighty equipment or crushing machines.

The primary benefit of worm gears is their capability to provide high reduction ratios and correspondingly high torque multiplication. They may also be used as acceleration reducers in low- to medium-quickness applications. And, because their decrease ratio is founded on the amount of gear teeth by itself, they are smaller sized than other styles of gears. Like fine-pitch business lead screws, worm gears are typically self-locking, making them well suited for hoisting and lifting applications.

Worms & Worm Gears
EP Gear’s worms and worm gears provide an effective answer for power transmitting applications requiring high-ratio quickness reduction in a restricted space using right angle (90°), nonintersecting shafts. When properly applied, worms and worm gears provide the smoothest, quietest kind of gearing.

Because the performance of a worm gear drive depends upon the business lead angle and number of starts on the worm – and because increased performance is always an objective, the ratio ought to be kept only possible. To run properly, worms and worm gears used together will need to have the same diametral pitch and threads.

Our complete line of worms and worm gears can be ordered through the EP Gear Guaranteed Same Day time Shipment Plan for the fastest delivery possible.
Product Features
90°, nonintersecting shaft applications solution highly specialized power transmitting needs.
Our worm gears offer the smoothest, quietest form of gearing.
They provide high-ratio speed reduction in minimal spaces.
Their efficiency is easily increased by decreasing ratios.
With some ratios, there is resistance to back driving.
Obtainable from 48 DP to 3 DP
Stocked as single, dual and quad start configurations

Tags:

Pto adapter

As one of leading pto adapter manufacturers, suppliers and exporters of mechanical products, We offer pto adapter and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto adapter

Recent Posts